How Do I Charge The Stellar Mics In My Nomono Stellar Kit?

Charging your Stellar Mics

1. Connect a USB cable to the Charging Dock and plug it into a power source.

2. Place the Nomono Stellar Mic(s) into the dock. The magnets should pull each mic down into position.

Charging will begin automatically when the mic is correctly seated in the dock.

How to tell if your Stellar Mics are charging

Check the LED light on each Stellar Mic:

• Slowly pulsing light (in its assigned color)

  → The Stellar Mic is charging.

• Steady light (in its assigned color)

  → The Stellar Mic is fully charged.

• No light

  → The Stellar Mic is not receiving power or is not charging.

If your Stellar Mic is not charging

If you see no LED light, try the following steps:

1. Remove the Stellar Mic from the dock and reinsert it a few times to ensure proper contact.

   • Make sure the magnets pull the mic firmly into place.

2. Try a different USB cable and/or power adaptor to rule out a faulty charger.

3. If the mic still does not charge, it may be stuck in an unexpected state.

   • Perform a hard reset and then try charging again.

   • Important: The USB cable must be disconnected from the Charging Dock while performing a hard reset.